Del Sol Si VTEC L4-1590cc 1.6L DOHC (VTEC) MFI (1997)
A/T Gear Position Signal: Testing and Inspection
A/T Gear Position Switch Test
1. Remove the center console, then disconnect the 14P connector from the switch.
Adjustment
2. Check for continuity between the terminals in each switch position according to the table.
-
Move the lever back and forth at each position without touching the push button, and check for continuity within the range of free play.
-
If there is no continuity within the range of free play, adjust the position of the switch. Refer to Adjustments. See: Adjustments