Del Sol Si VTEC L4-1590cc 1.6L DOHC (VTEC) MFI (1997)
_mfi/Page-1224002.png)
Shift Lock Solenoid Test/Replacement
-
When the shift lock solenoid is ON, check that there is a clearance of 2.5 ± 0.5 mm (0.098 ± 0.020 in) between the top rear corner of the shift
lock lever and the lock pin groove, then tighten the self-locking nuts.
NOTE: Use new self-locking nuts.
Shift Lock Solenoid Test/Replacement
-
When the shift lock solenoid is OFF, make sure that the lock pin is blocked by the shift lock lever.
