honda Workshop Repair Guides

Honda Workshop Service and Repair Manuals

Power Window Switch > < Power Window Relay|Locations|Page 7441
Page 1
background image

Heated Glass Element Switch: Testing and Inspection

NOTE: Before testing, check for a blown No.13 (7.5 A) fuse in the under-dash fuse/relay box.

1.  Carefully remove the switch from the instrument panel.

Rear Window Defogger-Switch Input Test

2.  Turn the ignition switch ON (II), and check the voltage at the BLK/YEL (+) and BLK (-) terminals. There should be battery voltage.

^  If there is no voltage, check for an open in the BLK/YEL wire.
^  If there is battery voltage, go to step 3.

3.  Connect a jumper wire between the BLK/YEL and BLU/YEL terminals. Turn the ignition switch ON (II), and check that the rear window

defogger works; if it does, replace the defogger switch.

Power Window Switch > < Power Window Relay|Locations|Page 7441