Element 2WD L4-2.4L (2003)
19.
Using your thumb and forefinger to hold the tumblers, remove the key from the inner cylinder, being careful not to drop any tumblers and springs.
20.
*Using the key code from the iN that you have written down at step 2, build a new inner cylinder with new springs, new cylinder, and tumblers
from the door lock cylinder kit. Make sure you put the appropriate numbered tumbler in the proper inner cylinder cavity. Apply a thin layer of
Permalube to each tumbler to help lubricate and retain it.*
NOTE:
^
There are two types of tumblers. The "SUBLOCK" tumbler goes only in cavity A." The "DISC" tumbler goes in cavities "B" through "J."
^
Cavity "E" is empty on all cylinders.
