honda Workshop Repair Guides

Honda Workshop Service and Repair Manuals

Ignition/Locks - Cutting Sidewinder-Type Keys|Page 7202 > < Ignition/Locks - Cutting Sidewinder-Type Keys
Page 2
background image

*T-5 Sidewinder Key Applications

^

2003-05 Civic

^

2004-05 Civic Hybrid

^

2003-05 Civic GX (CNG)

^

2004-05 S2000

^

2002-06 CR-V

^

2003-06 Element

^

2003-04 Odyssey

^

2003-04 Pilot

Ordering Honda key blanks through normal parts ordering channels:

Refer to the parts catalog for correct key(s) for your application.

PROGRAMMING KEYS

Depending on the type of key blank you use, do this:

^

If you have used a T-5 programmable key blank ("T-5" stamped on the shank), you must code the key's transponder with the Ilco Immobilizer Key
Code Duplicator (see S/B 99-053, Ilco Immobilizer key Code Duplicator).

^

If you have used a Honda key blank, add the* transponder code of the new key to the immobilizer system with the Honda Diagnostic System (HDS).

ORDERING INFORMATION

*To order the MATRIX H Key Cutting Machine, replacement cutter bits, fixed jaws and mobile jaws, T-5 programmable key blanks, and practice key
blanks, contact the Honda Tool and Equipment Program by calling 888-424-6857 or using the fax order form provided in your Honda Tool and
Equipment Program Catalog.*

Order Honda key blanks through normal parts ordering channels.

WARRANTY CLAIM INFORMATION

None. This service bulletin is for information only.

*DETERMINING WHICH KEY TO USE

T-5 keys require less time to program and should be the first choice. They can be used as long as the following requirements are met:

^

Do you have the customer's operating key?

^

Does the vehicle fall within the T-5 Sidewinder Key Applications?

^ Does your dealership have an Ilco Immobilizer Key Code Duplicator?

If the answer to all three questions on the above is yes, the 1-5 key option is the easier procedure. If you answered no to any of the questions, you should
order the key(s) from the parts catalogue, and program it using the HDS.*

BEFORE YOU START CUTTING

1.

Get the original key or the key number from your customer or from the iN.

2.

Get the applicable key blank.

3.

If cutting by code, look up the applicable 9-digit cutting code for the key number. Refer to the code book Honda High Security key Codes that
comes with the machine.

Ignition/Locks - Cutting Sidewinder-Type Keys|Page 7202 > < Ignition/Locks - Cutting Sidewinder-Type Keys