Element 2WD L4-2.4L (2003)
Technical Service Bulletin # 01-077
Date: 060419
Ignition/Locks - Cutting Sidewinder-Type Keys
01-077
April 19, 2006
Applies To:
Models With Sidewinder-Type Keys - All
Cutting Sidewinder-Type Keys With the MATRIX H Key Cutting Machine (Supersedes 01-077, dated January 12, 2005)
Updated information is noted by asterisks.
MATRIX H Key Cutting Machine, manufactured by Silca and supplied by Kaba Ilco Corporation, is a portable, power-operated tool that cuts
sidewinder-type automotive keys exclusively. The machine lets you cut these keys either by copying or by code. The code function is designed and built
to meet the Honda code requirements. No other similar machine has this capability.
This service bulletin gives you information for ordering and servicing this special tool, and guides you through the entire key cutting process from setting
up the machine to cutting the key blank.
TOOL INFORMATION
Order through the Honda Tool and Equipment
Program:
MATRIX H Key Cutting Machine:
Model No. ILCMATRIXSH
Cutter Bit: Model No. ILCF3O
Fixed Jaw: Model No. ILCMTX-H
Mobile Jaw (Right Side): Model No. ILCRTMTX-H
Mobile Jaw (Left Side): Model No. ILCLTMTX-H
*Remanufactured Clamp Unit:
Model No. ILCMATRIXHCR*
PARTS INFORMATION
*For some models, there are two choices for sidewinder-type key blanks:
^
T-5 sidewinder key blanks
^
Honda sidewinder key blanks
For other models, only Honda sidewinder key blanks can be used.
See DETERMINING WHICH KEY TO USE to determine which key blank you should choose.
Ordering T-5 key blanks through the Honda Tool and Equipment Program:
T-5 Programmable Key Blank (Master):
P/N ILC-35111-T-5H
T-5 Programmable Key Blank (Valet):
P/N ILC-35112-T-5H
Practice Key Blanks (five per pack): ILC-35111DEMO*
NOTE:
Do not use practice key blanks for replacement purposes. Practice keys do not have an immobilizer chip.
