Element 2WD L4-2.4L (2003)
13.
Push the top of the retainer clip with a flat-tip screwdriver, and hold it. Release the retainer clip with a hook-shaped tool, then remove the lock
cylinder. Go to step 14.
14.
With the door lock cylinder out of the door handle remove the E-clip and the arm.
15.
Try to insert the key into the cylinder and turn it.
^
If you can insert and turn the key, go to step 18.
^
If you cannot insert the key or turn it, go to step 16.
16.
Carefully remove the spring and plastic retainer.
