Element 2WD L4-2.4L (2003)
Seat Cover: Service and Repair
Front Seat Cover
Front Seat Cover Replacement
For some models: SRS components are located in this area. Review the SRS component locations and the precautions and procedures before performing
repairs or service.
NOTE:
-
Take care not to tear the seams or damage the seat covers.
-
On the passenger's seat with side airbag, do not touch the OPDS sensor in the seat-back pad, and keep it away from oil. Oil can corrode the sensor
causing it to fail.
-
Put on gloves to protect your hands.
Seat-back Cover
1. Remove the front seat.
2. Remove the armrest.
-
'03 model
-
'04-05 models
3. With side airbag: From under the seat cushion, detach the side airbag connector clip (A), and from under the passenger's seat cushion, then detach
the OPDS unit connector clip (B). Release the hook springs (C), pull the seat cushion cover (D) back, then remove the harness bands (E).
4. Fold the seat-back forward.