Element 2WD L4-2.4L (2003)
8.
Remove and discard the three nuts. Remove and retain the washers from the outboard front link and from the seat track. Remove and discard the
three bushings.
9.
Install the three new bushings and the outboard front link.
*10. Use brake cleaner to remove grease from any threads before installing the nuts.*
Install the original washers and new nuts. Torque the nuts to 22 N.m (16 lb-ft).
11.
Remove the center cover (three clips and two hooks) from the inboard seat track. Then remove the seat belt buckle (center anchor bolt, collar,
spring washer, and toothed lock washer).
