Element 2WD L4-2.4L (2003)
Trunk / Liftgate Switch: Testing and Inspection
Hatch Latch Switch Test
1. Open the hatch and remove the hatch trim panel.
2. Disconnect the 2P connector (A) from the hatch latch switch (B).
3. Check for continuity between the hatch latch switch 2P connector terminals No. 1 and No. 2.
-
There should be continuity with the hatch open.
-
There should be no continuity with the hatch closed.
4. If the continuity is not as specified, replace the switch.
