Element 2WD L4-2.4L (2003)
5. Clean the threaded portions of clevis A, and coat the threads of the clevis with grease. Clean the sliding surface of clevis B. and coat the sliding
surface of clevis B with grease. Install clevises A and B on the adjuster (C), and shorten clevis A by turning the adjuster.
6. Reinstall the brake shoe adjuster assembly (D), and hook the lower return spring (E) on the parking brake shoes.
7. Hook the rod spring (A) to the connecting rod (B) first with the spring end (C) pointing downward. Then hook the rod spring to the parking brake
shoe, and install the connecting rod on the parking brake shoes.
8. Reinstall the tension pins (A) and retainer springs (B). Make sure the tension pin does not contact the parking brake lever.