Element 2WD L4-2.4L (2003)
5. Remove the Automatic Transmission Fluid (ATF) cooler hoses (A/T).
6. Remove the upper radiator hose and lower radiator hose from the radiator, then pull up the radiator.
7. Remove the fan shroud assemblies and other parts from the radiator.
8. Install the radiator in the reverse order of removal. Make sure the upper and lower cushions are set securely.
9. Install the bulkhead in the reverse order of removal. Apply body paint to the bulkhead mounting bolts.
10. Fill the radiator with engine coolant and bleed the air.
