Element 2WD L4-2.4L (2003)
Camshaft Position Sensor: Service and Repair
CMP Pulse Plate Replacement
CMP Pulse Plate A Replacement
1. Remove the cylinder head cover.
2. Hold the camshaft with an open-end wrench, then loosen the bolt.
3. Remove the Camshaft Position (CMP) pulse plate A.
4. Install the CMP pulse plate A in the reverse order of removal.
CMP Pulse Plate B Replacement
1. Remove the cylinder head cover.
2. Hold the camshaft with an open-end wrench, then loosen the bolt.
