Element 2WD L4-2.4L (2003)
Out of warranty:
Any repair performed after warranty expiration may be eligible for goodwill consideration by the District Parts and Service Manager or your Zone
Office. You must request consideration, and get a decision, before starting work.
REPAIR PROCEDURE
1.
Update the PGM-FI software (refer to Service Bulletin 01-023, Updating Control Units/Modules).
2.
Verify the ECM/PCM PGM-FI software update repaired the vehicle by starting the engine and letting it idle for 3 minutes, then use the HDS to
check the DTC P0507 in OBD STATUS.
^
In HDS, click on Honda Systems.
^
Click on PGM-FI.
^
Click on DTCs/Freeze Data.