Element 2WD L4-2.4L (2003)
NOTE: Be sure the SRS unit is sitting squarely against its bracket before torquing the Torx bolts.
2. Reinstall the dashboard center lower cover.
3. Reconnect the driver's and front passenger's airbag connectors.
4. Reconnect the side airbag connectors.
5. Reconnect both seat belt tensioner connectors and both seat belt buckle tensioner connectors.
6. Reconnect the battery negative cable.
7. After installing the SRS unit, confirm proper system operation: Turn the ignition switch ON (II); the SRS indicator should come on for about 6
seconds and then go off.