Element 2WD L4-2.4L (2003)
97. Bend the lock washer against the flat spots on the bracket with a large pair of pliers.
98. Install the cylinder lines (A) and return line joint (B).
Note these items during reassembly:
^
Thoroughly clean the joints of the cylinder lines. The joints must be free of foreign material.
^
Install the cylinder lines by tightening the flare nuts by hand first, then tighten the flare nuts to the specified torque.
99. Adjust the rack guide screw. After adjusting, check that the rack moves smoothly by sliding it right and left.
