Element 2WD L4-2.4L (2003)
4. Press the wheel bearing inner race (A) from the hub (B) using the special tool, a commercially available bearing separator (C), and a press.
5. Wash the knuckle and hub thoroughly in high flash point solvent before reassembly.
6. Install the hub (A) and backing plate (B) on the new bearing unit (c) using the special tools and a hydraulic press. Be careful not to deform the
backing plate.
NOTE: (with ABS)
-
Remove any oil, grease, dust, or other foreign material from the encoder surface (D).
-
Keep magnetic tools away from the encoder surface.
-
Be careful not to damage the encoder surface.
7. Install the bearing unit (A) and knuckle (B).
