Element 2WD L4-2.4L (2003)
Pressure Regulating Solenoid: Service and Repair
Clutch Pressure Control Solenoid Valve B, and C Replacement
A/T Clutch Pressure Control Solenoid Valve B, and C Replacement
1. Remove the air cleaner housing.
2. Disconnect the A/T clutch pressure control solenoid valves B and C connectors.
3. Remove the mounting bolts, harness clamp brackets (A), and A/T clutch pressure control solenoid valves B and C.
4. Remove the ATF joint pipes (D), O-rings (E), and gasket (F).
5. Clean the mounting surface and fluid passage of the transmission housing.
6. Install the new gasket on the transmission housing, and install the ATF joint pipes.
7. Install the new O-rings over the ATF joint pipes.
8. Install the new A/T clutch pressure control solenoid valves B and C, and harness clamp brackets.
9. Check the A/T clutch pressure control solenoid valves B and C connectors for rust, dirt, and oil, clean if needed, then connect them securely.
10. Install the air cleaner housing.
