Element 4WD L4-2.4L (2004)
2. Install the trim in the reverse order of removal, and note these items:
-
Check for damaged or stress-whitened clips, and replace them with new ones.
-
Push the clips into place securely.
Trim Removal/Installation - Rear Side Pillar Area
Trim Removal/Installation - Rear Side Pillar Area
Special Tools Required
KTC trim tool set SOJATP2014 *
*Available through the American Honda Tool and Equipment Program;
NOTE:
-
Put on gloves to protect your hands.
-
Use the appropriate tool from the KTC trim tool set to avoid damage when prying components.
-
Take care not to bend or scratch the trim and panels.
Quarter Pillar Trim
1. Remove the quarter pillar trim as shown. To remove the trim, remove the upper portion of the rear side trim panel as needed.
