Element 4WD L4-2.4L (2004)
7. Remove the cover (A), then remove the three screws and the actuator (B).
8. Route the wire harness (A) of the new actuator through the hole in the bracket (B) and gasket (C).
9. Install the actuator, bracket, and cover in the reverse order of removal.
10. Insert the new actuator terminals into the connector in the original arrangement as shown.
11. Reassemble in the reverse order of disassembly. Be careful not to break in the mirror holder when reinstalling it to the actuator.
12. Reinstall the mirror assembly to the door.
13. Operate the power mirror to ensure smooth operation.