Element 4WD L4-2.4L (2004)
^
Refer to page 23-24 of the service manual, or
^
Refer to service bulletin 02-052 Initializing the OPDS Unit.
13.
With side airbags: Enter the radio anti-theft code, then enter the customer's presets. Set the clock.
14.
With side airbags: Reset the power window control unit:
^
Turn the ignition switch to ON (II), and make sure the driver's window AUTO function does not work.
^
Start the engine.
^
Push down the driver's window power window switch to the second detent (AUTO down) to lower the driver's window all the way down.
When the window reaches the bottom, hold the switch in the AUTO down position for 2 more seconds.
^
Pull up the driver's power window switch to raise the driver's window all the way up without stopping. When the window reaches the top, hold
the switch in the up position for 2 more seconds.
^
If the driver's window AUTO function does not work, repeat this power window control unit reset procedure.
^
Keep the engine running.
15.
With side airbags: Do the idle learn procedure:
^
Make sure all electrical items (A/C, audio unit, defogger, lights, etc.) are off.
^
Let the engine warm up to its normal operating temperature (the cooling fans cycle twice).
^
Let the engine idle (throttle closed and all electrical items off) for 10 minutes.
Disclaimer
