Element 4WD L4-2.4L (2004)
^
Online, enter keyword FRONT ARMREST, and select Front Seat Armrest Replacement - Driver's Seat from the list.
5.
Remove the front seat-back cover far enough to access the cover's top mounting springs, but do not remove the side airbag:
^
Refer to page 20-92 of the service manual, or
^
Online, enter keyword SEAT COVER REP, and select Front Seat Cover Replacement from the list.
NOTE:
On DX and LX models, you must entirely remove the seat-back cover and all of the mounting springs. On EX models, you can unzip the back
cover, disconnect the upper two springs, and pull it forward.
6.
Pull back the seat-back foam, and apply the 40 x 120 mm wool felt strips to the front edge of both sides of the seat frame.
