honda Workshop Repair Guides

Honda Workshop Service and Repair Manuals

Fan Motor Testing|Page 1955 > < Fan Motor Testing|Page 1953
Page 3
background image

12. Remove the jumper wire, and measure the voltage between radiator fan switch 2P connector terminal No. 2 and body ground.

Is there battery voltage?

YES - Check for an open in the wire between radiator fan switch 2P connector terminal No. 1 and body ground. If the wire is OK, check for a
poor ground at G301.
NO - Repair open in the wire between radiator fan switch 2P connector terminal No. 2 and the underhood fuse/relay box. 

Fan Motor Testing|Page 1955 > < Fan Motor Testing|Page 1953