Element 4WD L4-2.4L (2004)
Fluid Pressure Sensor/Switch: Service and Repair
2ND Clutch Fluid Pressure Switch Replacement
2nd Clutch Transmission Fluid Pressure Switch Replacement
1. Remove the air cleaner housing.
2. Disconnect the connector from the 2nd clutch pressure switch (A).
3. Remove the 2nd clutch pressure switch and use a new sealing washer (B). Tighten the switch on the metal part, not the plastic part.
4. Reconnect the connector, making sure there is no water, oil, dust, or foreign particles inside it.
5. Install the air cleaner housing.
