Element 4WD L4-2.4L (2004)
Power Window Switch: Service and Repair
Master Switch Replacement
Master Switch Test/Replacement
1. Remove the switch panel.
2. Remove the door handle.
3. Disconnect the 20P connector from the power window master switch.
Front Passenger's Switch
4. Check for continuity between the terminals in each switch position according to the tables.
Driver's Switch:
The driver's switch is combined with the control unit so you cannot isolate the switch to test it. Instead, run the master switch input test procedures.
If the tests are normal, the driver's switch must be faulty.
NOTE: Do the power window control unit reset procedure. if you disconnect the switch or replace it.
