Element 4WD L4-2.4L (2004)
4. Inspect the run channel alignment, both inside and outside the door. Pay close attention just below the door skin; this is a common area for the run
channel to be pinched.
^ If the run channel is pinched, replace it, then adjust the run channels and the glass as needed.
^ If the run channel is not pinched, go to step 5.
5. Clean the run channel using a soapy water solution, then apply Shin-Etsu grease. You may also need to clean the portion of the run channel within the
door.
SYMPTOM 3
During operation, the window squeaks, creaks, clunks, or clicks.
