Fit L4-1.5L (2008)
6. Remove the screws, then remove the latch (A) through the hole in the door. Take care not to bend the outer handle rod (B), cylinder rod (C), lock
knob rod (D), and inner handle rod (E).
7. Install the latch in the reverse order of removal, and note these items:
-
Make sure the actuator connectors are plugged in properly, and each rod is connected securely.
-
Make sure the door locks and opens properly.
-
When installing the door panel, make sure the plastic cover is installed properly and sealed around its outside perimeter to seal out water.