Fit L4-1.5L (2008)
Rear Door Exterior Handle: Service and Repair
Rear Door Outer Handle Replacement
NOTE: Put on gloves to protect your hands.
1. Remove the door panel.
2. Raise the glass fully.
3. Remove the plastic cover (A).
1. Remove the plug caps (B).
2. Pass the harness (C) through the hole (D) in the plastic cover.
4. Release the inner handle rod (A) and lock rod (B) from the rod holder (C).
5. Remove the screw, and release the hooks (D), then remove the rod protector (E).
6. Remove the screws securing the latch (A), then move the latch down. Take care not to bend any of the rods.