Fit L4-1.5L (2008)
Rear Door Window Regulator: Service and Repair
Rear Door Glass and Regulator Replacement
NOTE: Put on gloves to protect your hands.
1. Remove these items:
-
Door panel
-
Plastic cover, as needed
-
Rear door rear sash trim
2. Carefully move the glass (A) until you can see the bolts, then remove them. Remove the glass from the regulator (B), and carefully lower the glass.
Take care not to drop the glass inside the door.
3. Pull the glass run channel (A) away as needed. Loosen the nut (B), and remove the bolt (C) securing the rear lower channel (D).