Fit L4-1.5L (2008)
Carpet: Service and Repair
Carpet Replacement
SRS components are located in this area. Review the SRS component locations, and the precautions and procedures before doing repairs or service.
NOTE:
-
Put on gloves to protect your hands.
-
Take care not to damage, wrinkle or twist the carpet.
-
Be careful not to damage the dashboard or other interior trim pieces.
1. Remove these items:
-
Front seats:
-
Driver's seat
-
Passenger's seat
-
Kick panels, both sides
-
Front door sill trim, both sides
-
B-pillar lower trim, both sides
-
Rear door sill trim, both sides
-
Driver's dashboard undercover
-
Passenger's dashboard undercover
-
Center console
-
Rear seat leg guide cover, both sides
2. Pull the rear seat belt buckles and rear center shoulder seat belt detachable anchor out through each band on both seat cushions. Then lift both seat
cushions up.
3. From the bottom of the both rear seat-backs (A), release the fasteners (B) in the rear of the carpet (0. Pull the rear seat belt buckles (D) out through
a slit (E) in the buckle anchor carpet (F), then pull the carpet out from both cargo area side trim panels.
4. Remove the front portion of the carpet (A):
1. Disconnect the parking brake switch connector (B).