Fit L4-1.5L (2008)
Lap Belt Tensioner
9. For driver's side. Remove the front and rear door sill trim.
10. Remove the B-pillar lower trim, then disconnect the floor wire harness 2P connector (A) from the lap belt tensioner.
11. Under the front passenger's seat, disconnect the floor wire harness 2P connector (A) from the lap belt tensioner.
SRS Unit
12. Remove the center console.
13. Disconnect SRS unit connector A (28P), SRS unit connector B (28P), and SRS unit connector C (28P) from the SRS unit.
