Fit L4-1.5L (2008)
Scuff Plate: Service and Repair
Trim Removal/Installation - Door Areas
Special Tools Required
KTC trim tool set SOJATP2014 *
* Available through the American Honda Tool and Equipment Program
SRS components are located in this area. Review the SRS component locations and the precautions and procedures before doing repairs or service.
Front Door Sill Area
NOTE:
-
Put on gloves to protect your hands.
-
Use the appropriate tool from the KTC trim tool set to avoid damage when removing components.
-
Take care not to bend or scratch the trim and panels.
1. Left side: Remove the driver's dashboard undercover.
2. Remove the left kick panel (A) or the right kick panel (B).
1. Pull out the front door inner seal (C) from the kick panel hook (D) and the front door opening flange.
2. Pull the kick panel back by hand to detach the clips, and to release the hook (E) and tab (F) from the front door sill trim (G), then remove the
panel. On the driver's side, pull the hood opener knob (H) and hold it while removing the panel.
