honda Workshop Repair Guides

Honda Workshop Service and Repair Manuals

Sun Visor > < Scuff Plate|Service and Repair|Page 7479
Page 3
background image

2. Remove the B-pillar lower trim.
3. Remove the front lower portion of the cargo area side trim panel as needed.

4. While pulling the front lower portion of the cargo area side trim panel (A) back to release the hooks (B), pull the rear door sill trim (C) up by hand

to detach the clips, then remove the trim.

5. Install the trim in the reverse order of removal, and note these items:

-

Check for damaged or stress-whitened clips, and if necessary, replace them with new ones.

-

Push the clips into place securely.

Sun Visor > < Scuff Plate|Service and Repair|Page 7479