Fit L4-1.5L (2008)
3. Pull out the front door inner seal (A) from the trim hooks (B) and around the front door opening flange, then remove the seal.
4. Remove the B-pillar lower trim.
5. Pull the front door sill trim (A) up by hand to detach the clips, and release the hooks (B) from the slits in the carpet (C), then remove the trim.
6. Install the trim in the reverse order of removal, and note these items:
-
Check for damaged or stress-whitened clips, and if necessary, replace them with new ones.
-
Push the clips into place securely.
Rear Door Sill Area
NOTE:
-
Put on gloves to protect your hands.
-
Use the appropriate tool from the KTC trim tool set to avoid damage when removing components.
-
Take care not to bend or scratch the trim and panels.
1. Pull out the rear door inner seal (A) from the trim hooks (B) and around the rear door opening flange, then remove the trim.
