Fit L4-1.5L (2008)
Rear Door Weatherstrip: Service and Repair
Rear Door Outer Seal Replacement
Rear Door Outer Seal Replacement
NOTE:
-
Take care not to scratch the door.
-
Use a clip remover to remove the clips.
1. At the B-pillar, remove the door checker mounting bolt (A).
2. Detach the clips (B, C, D), then remove the door outer seal (E).
3. Install the seal in the reverse order of removal, and note these items:
-
Check for damaged or stress-whitened clips, and if necessary, replace them with new ones.
-
Make sure the outer seal is installed in the holder (F) securely.
-
Apply medium strength type liquid thread lock to the door stop mounting bolt before installation.
-
Check for water leaks.