Fit L4-1.5L (2008)
Brake Rotor/Disc: Service and Repair
Front Brake Disc Replacement
1. Remove the wheel nuts and front wheel.
2. Remove the brake hose mounting bolt (A).
3. Remove the brake caliper bracket mounting bolts (B), and remove the caliper assembly (C) from the knuckle. To prevent damage to the caliper
assembly or brake hose, use a short piece of wire to hang the caliper assembly from the undercarriage. Do not twist the brake hose excessively.
4. Remove the flat screws (A).
5. Remove the brake disc (B) from the hub.
NOTE: If the brake disc has clung to the hub. Screw two 8 x 1.25 mm bolts (C) into the brake disc to push it away from the hub. Turn each bolt
90 degrees at a time to prevent the brake disc from binding.
6. Install the brake disc and wheel in the reverse order of removal, and note these items:
^
Before installing the brake disc, clean the mating surface of the front hub and the inside of the brake disc.
^
Before installing the wheel, clean the mating surface of the brake disc and the inside of the wheel.
