Fit L4-1.5L (2008)
NOTE: During installation, set the new rod seal onto the master cylinder with its grooved side (H) toward the master cylinder.
11. Install in the reverse order of removal, and note these items:
^
Coat the inner bore lip and outer circumference of the new rod seal with the Shin-Etsu silicone grease (P/N 08798-9013).
^
Check the brake pedal height and free play after installing the master cylinder, and adjust if necessary.
12. Bleed the brake system.
13. Spin the wheels to check for brake drag.
14. Enter the anti-theft code for the audio unit, then enter the audio unit presets.