Fit L4-1.5L (2008)
6. Tighten the locknut and recheck the clearance. Repeat the adjustment if necessary.
7. Rotate the crankshaft clockwise. Align the No. 3 piston TDC groove (A) on the camshaft sprocket with the top edge of the head.
8. Check and if necessary, adjust the valve clearance on No. 3 cylinder.
9. Rotate the crankshaft clockwise. Align the No. 4 piston TDC groove (A) on the camshaft sprocket with the top edge of the head.
10. Check and if necessary, adjust the valve clearance on No. 4 cylinder.
11. Rotate the crankshaft clockwise. Align the No. 2 piston TDC groove (A) on the camshaft sprocket with the top edge of the head.
12. Check and if necessary, adjust the valve clearance on No. 2 cylinder.
13. Install the cylinder head cover.
