Fit L4-1.5L (2008)
DTC 11-1: Sensor (Tire) 1
DTC 13-1: Sensor (Tire) 2
DTC 15-1: Sensor (Tire) 3
DTC 17-1: Sensor (Tire) 4
NOTE:
^
If another DTC is found, refer to ISIS or the appropriate service manual to troubleshoot that DTC first.
^
The sensor number does not indicate the location of the faulty sensor.
3.
Use the TPMS sensor tool and the HDS to determine the location of the faulty sensor. On the HDS, go to the TPMS screen. Select Functional
Test, then select Sensor Position Check. Follow the onscreen instructions, then go to REPAIR PROCEDURE to replace the faulty sensor.
*
NOTE:
For more information on using the TPMS sensor tool with the HDS, refer to Service Bulletin 06-072, TPMS Sensor Tool Usage or training
module SSC15, Initiator-less and Initiator Type TPMS.*
REPAIR PROCEDURE
Replace the faulty sensor:
^
Refer to the appropriate service manual, or
^
Online, enter keywords TIRE SENSOR, and select Tire Pressure Sensor Replacement from the list.
This procedure also includes the tire pressure sensor ID learn procedure. Make sure to do this procedure for all four sensors, even if you replace only one
sensor.
Disclaimer
