Fit L4-1.5L (2008)
5. With a dry air source, inflate the tire to 300 kPa (3.1 kgf/cm2, 44 psi) to seat the tire bead to the rim, then adjust the tire pressure.
NOTE: Make sure the tire bead is seated on both sides of the rim uniformly.
6. Check and adjust the wheel balance, then install the wheels on the vehicle. Torque the wheels to specifications.
7. Remove the jack stands, and lower the jack.
8. Connect the HDS, and memorize the pressure sensor ID(s) using the TPMS sensor initializer tool.