honda Workshop Repair Guides

Honda Workshop Service and Repair Manuals

Data Link Connector|Part 1|Page 2978 > < Data Link Connector|Part 1|Page 2976
Page 3
background image

14. Check for continuity between ECM/PCM connector terminal E9 and body ground.

Is there continuity?

YES - Go to step 15.

NO - Replace the No. 11 IG FUEL PUMP (15 A) fuse, and update the ECM/PCM if it does not have the latest software, or substitute a
known-good ECM/PCM, then recheck. If the symptom/indication goes away with a known-good ECM/PCM, replace the original ECM/PCM.

15. Remove PGM-FI main relay 2 (FUEL PUMP) (A) from the under-dash fuse/relay box.

16. Check for continuity between ECM/PCM connector terminal E9 and body ground.

Is there continuity?

YES - Repair short in the wire between the No. 11 IG FUEL PUMP (15 A) fuse and the ECM/PCM (E9), between the No. 11 IG FUEL PUMP 
(15 A) fuse and PGM-FI main relay 2 (FUEL PUMP), or between the No. 11 IG FUEL PUMP (15 A) fuse and the immobilizer control unit. Also
replace the No. 11 IG FUEL PUMP (15 A) fuse.

NO - Go to step 17.

17. Remove the center console.
18. Remove the access panel from the floor (see step 4).
19. Disconnect the fuel pump 4P connector.
20. Check for continuity between fuel pump 4P connector terminal No. 2 and body ground.

Data Link Connector|Part 1|Page 2978 > < Data Link Connector|Part 1|Page 2976