Fit L4-1.5L (2008)
1. Hold the camshaft with a 27 mm open-end wrench.
2. Apply new engine oil to the threads of the CMP pulse plate mounting bolt (A), then install the CMP pulse plate (B).
3. Install the camshaft thrust cover (A) with new O-ring (B).
4. Install the CMP sensor with new O-ring, then connect the CMP sensor connector.
5. Install the cylinder head cover.
6. Install the harness holder, then install harness clamps, ground cable and air cleaner housing bracket.
7. Install the air cleaner assembly.
