honda Workshop Repair Guides

Honda Workshop Service and Repair Manuals

A/C - A/C/Defogger Switches Inoperative/Fuse 22 Blown|Page 620 > < A/C - A/C/Defogger Switches Inoperative/Fuse 22 Blown
Page 2
background image

^

Mode Control Cable Adjustment

^

Air Mix Control Cable Adjustment

1. Remove the glove box.

2. Remove the passenger's dashboard undercover.

3. Remove the dashboard center panel.

NOTE:

^

Be careful not to scratch the dashboard or any other parts.

^

Do not use tools to remove the center panel.

4. Remove the A/C and rear window defogger switch from the center panel by pushing it out from the back of the panel.

5. Install a new A/C and rear window defogger switch into the center panel by pressing it in from the front of the panel.

6. Reinstall the dashboard center panel:

^

Make sure to securely reconnect all connectors, including the 13P connector for the A/C and rear window defogger switch.

^

Replace any damaged trim clips.

^

Torque the two center panel bolts to 5 N.m (4 lb-ft).

^

Adjust the recirculation control cable, the mode control cable, and the air mix cable.

7. Reinstall the passenger's dashboard undercover. Replace any damaged trim clips.

8. Reinstall the glove box. Torque the two glove box bolts to 5 N.m (4 lb-ft).

9. Check the No.22 fuse in the under-dash fuse/relay box. If the fuse is blown, replace it.

Disclaimer

A/C - A/C/Defogger Switches Inoperative/Fuse 22 Blown|Page 620 > < A/C - A/C/Defogger Switches Inoperative/Fuse 22 Blown