Fit L4-1.5L (2008)
8. Tighten the bolts on the transmission range switch while you continue to hold the N position. Do not move the transmission range switch when
tightening the bolts. Remove the feeler gauge.
9. Check the connectors for rust, dirt, or oil, clean or repair if necessary, then connect the connector securely.
10. Turn the ignition switch to ON (II). Move the shift lever through all positions, and check the transmission range switch synchronization with the
A/T gear position indicator.
11. Check that the engine starts in P and N, and does not start in any other shift lever position.
12. Check that the back-up lights come on when the shift lever is in R.
13. Allow the front wheels to rotate freely, then start the engine, and check the shift lever operation.
14. Install the transmission range switch cover.
