Fit L4-1.5L (2008)
7. Check the mica depth (A). If the mica is too high (B), undercut the mica with a hacksaw blade to the proper depth. Cut away all the mica (C)
between the commutator segments. The undercut should not be too shallow, too narrow, or V-shaped (D).
8. Check for continuity between the segments of the commutator. If there is an open circuit between any of the segments, replace the armature.
9. Place the armature (A) on an armature tester (B). Hold a hacksaw blade (C) on the armature core. If the blade is attracted to the core or vibrates
while the core is turned, the armature is shorted. Replace the armature.
10. Use an ohmmeter to check for continuity between the commutator (A) and the armature coil core (B), and between the commutator and the
