Fit L4-1.5L (2008)
A TPMS sensor tool is used for troubleshooting and replacing the TPMS sensors. See TOOL DESCRIPTION for more information.
WARRANTY CLAIM INFORMATION
None.
TOOL INFORMATION
TOOL DESCRIPTION
TPMS Sensor Tool
The TPMS sensor tool is a wireless tool that is used with the HDS for troubleshooting (sensor position check) and for replacing TPMS sensors or the
control unit (sensor ID learning).
General use:
^
Always make sure the TPMS sensor tool is set to low power unless otherwise instructed.
*^ Make sure there are no vehicles or other wheels with TPMS sensors within 10 feet of the vehicle you are working on.
^
Make sure the batteries are in good condition and secure in the case. Refer to ServiceNews article A07050D, Keep Those TPMS Sensor Tool
Batteries From Popping Loose, for more information.*
^
Turn on the TPMS sensor tool by following the HDS instructions. There are two different wavelengths used, and there are two ways to turn on the
TPMS sensor tool. If the TPMS sensor tool is not turned on correctly, you won't be able to troubleshoot the vehicle or do the sensor ID learning
procedure.