Fit L4-1.5L (2008)
Pressure Regulating Solenoid: Service and Repair
A/T Clutch Pressure Control Solenoid Valve A Replacement
A/T Clutch Pressure Control Solenoid Valve A Replacement
1. Remove the air cleaner assembly.
2. Disconnect the A/T clutch pressure control solenoid valve A connector.
3. Remove the mounting bolts and A/T clutch pressure control solenoid valve A.
4. Remove the ATF pipe (B), the ATF joint pipes (C), the O-rings (D), and the gasket (E).
5. Check the fluid passage of the A/T clutch pressure control solenoid valve for dust or dirt, and clean the passage.
6. Install the new gasket on the transmission housing, and install the ATF pipe and the ATF joint pipes.
7. Install the new O-rings over the ATF joint pipes.
8. Install A/T clutch pressure control solenoid valve A.
9. Check the A/T clutch pressure control solenoid valve A connector for rust, dirt, or oil, then connect the connector securely.
10. Install the air cleaner assembly.
