Fit L4-1.5L (2008)
9. Pry up the lock tab of the lock washer (C), and remove the lock bolt (D) and the lock washer, then separate the shift cable (E) from the selector
control shaft (F).
10. Insert the new shift cable (A) through the grommet hole (B), and install the grommet (C) in its hole. Do not bend the shift cable excessively.
11. Secure the shift cable bracket (D) with the nuts.
12. Install the control lever (A) over the selector control shaft (B). Secure the control lever with new lock washer (C) and the lock bolt (D), then bend
the lock tab of the lock washer against the bolt head.
13. Install the shift cable holder (E), then install the shift cable cover (F).