Fit L4-1.5L (2008)
1. Install the shift lever assembly.
2. Connect the shift lock solenoid/park pin switch/A/T gear position indicator panel light connector, and install the harness clamps on the shift lever
bracket base.
3. Install the shift cable on the shift lever, and adjust the cable.
Paddle Shifter + (Upshift Switch) Replacement
Paddle Shifter + (Upshift Switch) Replacement
SRS components are located in this area. Review the SRS component locations, and the precautions and procedures before doing repairs or service.
1. Remove the steering wheel.
2. Remove the four screws (A) securing the steering wheel rear cover (B), then remove the steering wheel rear cover.
3. Remove the paddle shifter + (upshift switch) connector from its holder, and disconnect the connector.
4. Remove the screw (C) securing the paddle shifter + (D), remove the paddle shifter +, and replace it with a new one.
5. Install the cruise control switch (E), if necessary.
6. Install the new paddle shifter + on the steering wheel, and secure it with the screw.
7. Connect the paddle shifter + connector securely, and install the connector in the connector holder.
8. Install the steering wheel rear cover, and secure the rear cover with the four screws.
9. Install the steering wheel.
Paddle Shifter - (Downshift Switch) Replacement
Paddle Shifter - (Downshift Switch) Replacement
SRS components are located in this area. Review the SRS component locations, and the precautions and procedures before doing repairs or service.
1. Remove the steering wheel.
2. Remove the four screws (A) securing the steering wheel rear cover (B) and front left cover (C), then remove the steering wheel rear cover.