Fit L4-1.5L (2008)
10. Measure the rivet depth from the clutch disc lining surface (A) to the rivets (B) on both sides. If the rivet depth is less than the service limit,
replace the clutch disc.
Pilot Bearing Inspection
1. Turn the inner race of the pilot bearing with your finger. The pilot bearing should turn smoothly and quietly. Check that the pilot bearing outer
race fits tightly in the crankshaft. If the race does not turn smoothly, quietly, or fit tight in the crankshaft, replace the pilot bearing.
Pilot Bearing Replacement
1. Remove the pilot bearing (A) using the bearing remover shaft (B) and the slide hammer (C).
